Frame/Housing: | Aluminum die-casting | ||||||||||||||||||||
Impeller: | Plastic or steel | ||||||||||||||||||||
Bearing System: | Ball bearing | ||||||||||||||||||||
Motor: | Shaded pole or capacitor start-run | ||||||||||||||||||||
Protection: | Impedance-Protected or Thermally-Protected or Electronically-Protected | ||||||||||||||||||||
Insulation Resistance: | Above 100MΩ, DC500V. | ||||||||||||||||||||
Dielectric withstand voltage | AC 1,500V (50/60Hz) one minute | ||||||||||||||||||||
Life Expectancy: | Ball bearing: Over 40,000 hr. (at 40℃) | ||||||||||||||||||||
Safety Approval: | CUL, CE, TUV, either UL or ETL. | ||||||||||||||||||||
Description of Model No. |
|
UF180(55)APA11H2C2 | UF180(55)APA23H2C2A | ||
---|---|---|---|
Rated Voltage | 115 V | 230 V | |
Frequency | 50/60 Hz | 50/60 Hz | |
Input Power | 63/78 W | 63/78 W | |
Rated Current | 0.6/0.7 A | 0.3/0.34 A | |
Locked Current | 0.92/0.95 A | 0.46/0.48 A | |
Speed | 2550/2800 RPM | 2550/2800 RPM | |
Maximum Air Flow | 7.5/8.3 m3/min. | 7.5/8.3 m3/min. | |
Maximum Air Flow | 265/290 CFM | 265/290 CFM | |
Maximum Pressure | 26/36 mmH2O | 26/36 mmH2O | |
Maximum Pressure | 1/1.4 InchH2O | 1/1.4 InchH2O | |
Noise | 64/67 dB | 64/67 dB | |
Weights | 1.2 kg | 1.2 kg |