Frame/Housing: | Aluminum die-casting | ||||||||||||||||||||
Impeller: | Plastic or steel | ||||||||||||||||||||
Bearing System: | Ball bearing | ||||||||||||||||||||
Motor: | Shaded pole or capacitor start-run | ||||||||||||||||||||
Protection: | Impedance-Protected or Thermally-Protected or Electronically-Protected | ||||||||||||||||||||
Insulation Resistance: | Above 100MΩ, DC500V. | ||||||||||||||||||||
Dielectric withstand voltage | AC 1,500V (50/60Hz) one minute | ||||||||||||||||||||
Life Expectancy: | Ball bearing: Over 40,000 hr. (at 40℃) | ||||||||||||||||||||
Safety Approval: | CUL, CE, TUV, either UL or ETL. | ||||||||||||||||||||
Description of Model No. |
|
UF220APA11H2C2A | UF220APA23H2C2A | ||
---|---|---|---|
Rated Voltage | 115 V | 230 V | |
Frequency | 50/60 Hz | 50/60 Hz | |
Input Power | 90/117 W | 90/117 W | |
Rated Current | 0.63/0.8 A | 0.35/0.39 A | |
Locked Current | 0.88/0.93 A | 0.47/0.49 A | |
Speed | 2500/2650 RPM | 2500/2650 RPM | |
Maximum Air Flow | 14/15 m3/min. | 14/15 m3/min. | |
Maximum Air Flow | 500/530 CFM | 500/530 CFM | |
Maximum Pressure | 35/38 mmH2O | 35/38 mmH2O | |
Maximum Pressure | 1.4/1.7 InchH2O | 1.4/1.7 InchH2O | |
Noise | 65/70 dB | 65/70 dB | |
Weights | 1.5 kg | 1.5 kg |